满足的标准和法规
特征值
使用 METRACLIP 61 做为保护导体电流测试的附件
测量范围: 0 ... 30 mA AC
配合 PROFITEST MXTRA 测试的项目:
保护导体测试
Measuring range: 0.1 Ω ... 6 Ω,
see technical data on RLO function
of the PROFITEST MXTRA
绝缘测试
Measuring range: 50 kΩ ... 500 MΩ,
see technical data on RISO function
of the PROFITEST MXTRA
连接
Test outlets
Earth contact IN4:
1P+N+PE, 0.8 A, 230 V
3P+N+PE
IN2/OUT2:
0.8 A, 400 V
供电
230/400 V 50 Hz
电压和频率
电网连接方式
最大输出功率
单相电通过市电插座:
230 V 1P+N+PE 16 A
或
三相电通过ISO 适配器:
230/400 V 3P+N+PE 16 A
Earth contact: 20 VA
CEE: 60 VA
仪器功耗
Earth contact: < 3 VA
CEE: < 6 VA
电气安全
安全等级 300 V CAT II
2
污染指数
保险丝
Supply network:
Single-phase (N1):
FLN: 2 ea. F0-8A/250V, 5 x 20 mm
3-phase (N2):
F1, F2 and F3:
3 ea. F0.8A/500V, 6.3 x 32 mm
环境条件
操作温度 -5 ... + 50°C
存储温度 -20 ... + 60°C
相对湿度
Max. 75%, no condensation allowed
IP 40 per DIN VDE 0470, part 1, connec
tions: IP 20
Housing:
Approx. 401 x 307 x 173 mm
(without connector cable, with surface mount
sockets)
机械构造
防护等级
尺寸
(W x H x D)
重量
Approx. 6.4 kg (with connector cable)
连接和控制面板一览
IEC 61010-1/
DIN EN 61010-1/
VDE 0411-1
Safety requirements for electrical equipment for mea
surement, control and laboratory use
– General requirements
EN 60529
VDE 0470, part 1
Test instruments and test procedures
Degrees of protection provided by enclosures (IP code)
IEC 61851-1
DIN EN 61851-1
Electric vehicle conductive charging system
– Part 1: General requirements
PROFITEST⏐EMOBILITY
适用于单/三相，模式2和3的充电线测试适配器德